Professional advice
Customised assembly
High-quality technology
Engineering know-how
Over 2,000 satisfied customers
callback service
Go to homepage
Wishlist
Shopping cart €0.00*

Bendable LED-Strip 60 LED/m - 700lm/m - 3.000K warm white

Skip image gallery
slide 1
e
a g
product-datasheet

€49.00*

Content: 5 Meter (€9.80* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Color temperature
Rolle
Product number: LK04-7f-30
Available stock: 16
  • Bendable LED strip - 60 LED/m
  • Colour rendering: High CRI>90
  • Brightness: 700lm/m
  • Voltage: 24 Volt
  • Power: 7,2Watt/m
  • Width: 10mm

Price for 1 roll = 5 meters


This highly flexible LED strip can be bent in all directions, horizontally and vertically. The incorporated bending elements allow very free laying in all directions, so that you can guide the LED strip along any contours without soldering effort and also form a circle, for example.


Available variants

  • 5m roll IP20 without water protection, incl. 10cm connection cable
All versions have a 3M adhesive tape on the back for mounting, are divisible every 10 cm and are available in various colour temperatures (e.g. 3,000K warm white).




Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.

For brightness control of 5m a driver with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere.

Answers to frequently asked questions can be found in our FAQ.

 

 

Properties "Bendable LED-Strip 60 LED/m - 700lm/m - 3.000K warm white"
Brightness lm/m: 700
Color temperature: 3000K warm
Energy efficiency class (EEK): E
Power: 7
Seperatable every (cm): 10 cm
Strip width in mm: 10
Voltage: 24V
Water protection: IP20 without waterprotection
LED/m: 60
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
datasheet
Skip product gallery

Suitable Accessories

slide 11 to 15
Inline dimmer 12-48V | 1x20A
Inline dimmer 12-48V | 1x20A
This inline LED dimmer can be easily connected between the power supply unit and LED strips and allows convenient dimming via a rotary potentiometer. In the end position, the LEDs are completely switched off.The dimmer can control LED components such as LED strips from 12 - 48V. It also allows dimming of the new 48V LED strips for particularly long installation lengths.The PWM frequency can be set in 4 steps between 500Hz, 2KHz, 8 KHz and 16 KHz via DIP switches. With 8 and especially 16 KHz, the dimmer is also ideally suited for flicker-free video recordings, for example. A further DIP switch allows you to switch between linear and logarithmic (gamma 1.6) dimming behavior.Depending on the choice of PWM frequency and voltage range, the controller can process different currents between 8A (16KHz PWM, 48V) and 20A (500Hz PWM, 24V). More detailed information can be found directly on the housing.A small display shows the set dim value. This can also be used to set the fade on/off time to 0.5 or 3s. If required, an additional RF remote control (see recommended accessories) can be linked to the dimmer. Technical data: Dimensions (LxWxH): 117 x 75 x 20mm (+ 13mm potentiometer)Voltage range: 12 - 48VDCMax. Current: See housing imprintPWM frequency: 0.5 - 16 KHzShort-circuit and overload protection
Product number: LK146-1

€42.00*
PushDim LED dimmer 12-48V | 1x15A
PushDim LED dimmer 12-48V | 1x15A
This PushDim LED dimmer can be easily connected between the power supply unit and LED strips and allows convenient dimming via PushDim, e.g. an usual pushbutton. In the end position, the LEDs are completely switched off.The dimmer can control LED components such as LED strips from 12 - 48V. It also allows dimming of the new 48V LED strips for particularly long installation lengths.The PWM frequency can be set in 4 steps between 500Hz, 2KHz, 8 KHz and 16 KHz via DIP switches. With 8 and especially 16 KHz, the dimmer is also ideally suited for flicker-free video recordings, for example. A further DIP switch allows you to switch between linear and logarithmic (gamma 1.6) dimming behavior.Depending on the choice of PWM frequency and voltage range, the controller can process different currents between 6A (16KHz PWM, 48V) and 15A (500Hz PWM, 24V). More detailed information can be found directly on the housing.A small button allows to change the fade on/off time to 0.5 or 3s. If required, an additional RF remote control (see recommended accessories) can be linked to the dimmer. Technical data: Dimensions (LxWxH): 175 x 46 x 27mmVoltage range: 12 - 48VDCMax. Current: See housing imprintPWM frequency: 0.5 - 16 KHzShort-circuit and overload protection
Product number: LK146-2

€42.00*
Handheld remote for LK146 dimmers
Handheld remote for LK146 dimmers
RF hand-held remote control for the LK146 dimmer. 1 zone, 2 memory locations.Incl. wall bracket. Technical data: Dimensions (LxWxH): 134 x 40 x 11mmRange: up to 30m in free fieldPower supply via CR2032 button cell
Product number: LK146FBmas

From €22.00*
Details
Controller lk82mini-led-controllerinline
Mini LED dimmer inline 12-24V | 1x4A
This mini LED dimmer can be easily connected between power supply and LED strip and allows convenient dimming via a large rotary potentiometer. In the final position the LEDs are completely switched off. Dimensions: approx. 70 x 35 x 35mm (plus cable)Voltage: 12 - 24VDC PWM frequency: approx. 1,200 Hz Scope of delivery: 1x Mini dimmer LK82
Product number: LK82

€7.50*
Mini LED dimmer for aluminium profiles - Wipe sensor | 12-24V | 1x3A
Mini LED dimmer for aluminium profiles - Wipe sensor | 12-24V | 1x3A
This mini LED dimmer is only 10mm wide and can be installed directly in an aluminium profile, for example. It works with a wipe sensor so that the light can be switched and even dimmed with a simple hand movement at a short distance (max. 4cm) from the sensor.If you wipe your hand past the sensor, the light is switched on. If you hold your hand in front of the sensor, the light is dimmed up and down. Always in alternation. No profile cover must be installed above the wipe sensor. If necessary, drill a sufficiently large hole in the cover so that the wipe sensor can work properly. Attention! The mini LED dimmer with wipe sensor does NOT remember the last dim setting in case of power loss.  Dimensions: approx. L45 x W10 x H8mm 
Product number: LK138w

€14.50*
Mini LED dimmer for aluminium profiles - Touch | 12-24V | 1x3A
Mini LED dimmer for aluminium profiles - Touch | 12-24V | 1x3A
This mini LED dimmer is only 10mm wide and can be installed, for example, directly with in an aluminum profile. At the point where the spring of the dimmer touches the profile cover, the light can be switched and dimmed by touching the cover with your finger. A short touch switches the LED light on and off. A long touch dims the LED light up and down - always alternating. The spring reacts sensitively even through the cover. A small LED inside the spring marks the appropriate place for the touch well, even with opal covers. The mini LED dimmer remembers the last dim setting even when power is lost, so you can combine it with a normal on/off switch.  Dimensions: approx. L50 x W8 x H10mm  Usable for profiles with an inner height (distance to cover) of min. 5 - max. 10mm.
Product number: LK138t

€14.90*