Accent applications: LED Strip 2016 -120 LED/m - 900 lm/m - 3.000K warm white - IP20 5m roll

LED-Studien GmbH

a g

product-datasheet

€49.00*

Content: 5 Meter (€9.80* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Color temperature

2200K extra warm

2700K warm

3000K warm

4000K neurtal

6000K cool

Water protection

IP20 without waterprotection

IP67 with silicon tube

Rolle

Product number: LK04-26b-30

Available stock: 39

LED type: 2016 - 120 LED/m
Brightness: 900 lm/m
Color rendering: High CRI>90
Voltage: 24 Volt
Power: 9,6 Watt/m
with constant current sources (KSQ)
Width: 10mm (12mm for IP67)

Price for 1 roll = 5 meters

LED strip with high color rendering quality (CRI>90) and good price-performance ratio. With a brightness of approx. 900 lm/m at a power consumption of only 9.6W/m, it is ideal for accent or effect applications. In smaller rooms (up to approx. 20m²), indirect room lighting can usually be realized. Thereby, due to the 6 color temperatures, a suitable alternative is available for every application scenario.

The built-in constant current sources (KSQ) ensure a uniform brightness of the LEDs even over longer lengths. Up to 12m with one-sided feed!

All variants have a 15cm connection cable, 3M adhesive tape on the back for mounting and can be split every 5cm.

More available variants

5m roll IP67 water protection in silicone hose, incl. 15cm connection cable
IP20 sold by the meter in 1 - 40m length

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 75 Watt is required. 5m x 14W/m = 70 Watt.

For brightness control of 5m a driver with min. 3,2 Ampere is needed. 75W / 24V = 3,2 Ampere.

Answers to frequently asked questions can be found in our FAQ.

Properties "Accent applications: LED Strip 2016 -120 LED/m - 900 lm/m - 3.000K warm white - IP20 5m roll"

Brightness lm/m:	900
Color temperature:	3000K warm
Colour rendering:	CRI>90
Energy efficiency class (EEK):	F
Power:	10
Seperatable every (cm):	5,0 cm
Strip width in mm:	10
Voltage:	24V
Water protection:	IP20 without waterprotection
LED/m:	120

Data according to manufacturer. Errors and changes reserved.

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

datasheet

Power Supply

Power supply HLG 24V - 2.5A - 60 Watt, extremely quiet

Switching power supply Meanwell HLG-60-24, 24 Volt, 2.5 Ampere, 60W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data: Model HLG-60-24 Voltage 24V Maximum power 60W Current 2.5A Adjustable voltage range 22 ~ 27V Overcurrent protection 95...108% Inrush current, max. 55A Voltage input 90...264V AC (47...63Hz), 127...370V DC Power factor 0,95 Working temperature -40...+80°C Dimensions 171x61.5x36.8mm (LxWxH) Weight 730g

Product number: LED1166

€44.00*

Recommended Drivers

Radio dimmer LK55-2 | 1 x 8A

The 1 x 8 amp driver offers only one output and is therefore only suitable as a dimmer. Due to the 8 amps, however, very powerful LED components can be connected. At 24 volts, for example, LED components up to 170 watts are possible. The driver is installed between the power supply and the LED component. It is ideally suited for small and medium installations, as well as a supplement for larger installations. The driver belongs to the LK55 series and can be combined with all dimmer remote controls available there. NOTES: All drivers of our LK55 series remember the last setting even in case of power loss. RGBW and CCT color temperature remote controllers have no function on the LK55-2 LED dimmer. Technical data: Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 1 x 8A Min. dim level: <1% (for RGB/W <3%)Connection: input: V+/ground, push button; output: V+/groundIP class: IP 20 Dimensions: LxWxH 95x37x20mm Operation via pushbutton input The LK55-2 offers 2 green screw terminals on the back for a button input. For example, a simple pushbutton can be connected to this and thus control the light without radio. Short keystroke switches the LEDs on and off. Long keystroke dims the LEDs up and down. Instead of a pushbutton, in principle only 2 cables can be connected, which are then held together short or long. Video tutorial for dimming via radio Video tutorial for dimming via cable with PUSH DIM

Product number: LK55-2

€36.00*

LK55 Universal Controller 12-36V for LED Strips, Panels etc.

Product number: LK55mas

€59.00*

Details

Suitable Radio Control for Drivers

Handheld remote control touch wheel | 4 zones

Brightness control up to 4 light zones operateable Touch wheel for adjusting the brightness 1 Channel 3 memory keys for individual settings All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. NOTICE: The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls. Technical data: Item no. LK55FB1 Power supply 3 x 1,5V AAA batteries Dimensions (LxWxH) 120x55x17mm Operation: This video explains the functions of the LK55FB1:

Product number: LK55FB1

€49.00*

Remote control with button | 1 zone | wall mounting

Select variant: Button

Pushbutton/dimmer for wall mounting or, thanks to the ultra-flat design, directly for gluing or screwing onto the wall. for universal driver of the LK55 series Operateable zones: 1 Power supply: 3V CR2430 battery Use in a standard switch series Since the stylus uses the standardized 55mm dimension (55x55mm), another frame can also be used. The central pushbutton can be removed and inserted into the frame of a known switch series, e.g. JUNG AS 500, MERTEN M, GIRA System 55 or GIRA E2. All major manufacturers have switch series in their program that fit the 55 standard dimension. LK55 series All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. NOTICE: The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls. Technical data: Item no. LK55K1w Power supply 3V CR2430 batteries Dimensions (BxWxD) 86x86, Installation depth: 13mm Installation:

Product number: LK55K1w

€39.00*

Remote control with rotary knob | wall mounting

Color: white

for 1-channel receivers of the LK55 series Controllable zones: 1 Battery operation: 3V DC, CR2025 All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 30m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Power supply: Note that some models are powered by a battery (coin cell) that must be replaced every 1-2 years. This applies to all pushbutton and potentiometer models. All models with touch field can be supplied via the 230V house network, so that no battery change is required. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. NOTICE: The LK55 remote control for pure dimming should not be used in combination with CCT LED strips (adjustable color temperature) or RGBW LED strips, but only for pure white LED strips with fixed color temperature. Background: When dimming via you would lose all color settings here, because the LED drivers drive all outputs (RGBW or WW/KW) down or up identically. Instead, dim via the appropriate CCT or RGBW remote controls. Technical data: Item no. LK55W Power supply 110-240VAC Dimensions (BxWxD) 86x86x12mm, Installation depth: 20mm

Product number: LK55Ww

€34.00*

Suitable Accessories for IP67

Silicone end cap: 12mm

Suitable silicone can be ordered separately.

Product number: SAK12

€0.30*

Silicone (acetate-free!) - 5ml

With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).

Product number: SIL01

€2.50*

mounting clamp for 12mm silicone

Montageklammer A12 Metall -12,2mm Breite - geeignet für Silikonschlauch

Product number: AL-KLH06

€0.95*

Waterprotected cable set: 2-pin

Das Set erlaubt es in Verbindung mit Silikondichtmasse und Endkappen wasserdichte Anschlüsse für weiße LED-Streifen herzustellen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Stücke geteilt werden soll.

Product number: LK04-23d-Con2

€2.50*