RGBW NEONFLEX LED Band - 26W/m - 16mm wide - VERTICAL bendable

LED-Studien GmbH

a g

LK04-38-2

product-datasheet

€119.00*

Content: 5 Meter (€23.80* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-5 days

Product number: LK04-38-2

Available stock: 40

LED type: 2835 RGB + 2216 white
120 RGB +120 white LED/m
Waterproof IP65
Brightness: total 480 lm/m
Red: 60 lm/m
Green 160 lm/m
Blue: 40 lm/m
White: 220lm/m, 2800K
Voltage: 24 Volt
Power: 26 Watt/m
Width: 16mm
Height: 16mm

Price for 1 roll = 5m

The RGBW NEON FLEX ribbons are absolutely uniform light ribbons with almost no individual LEDs visible. This is achieved by a milky-opal silicone shell that encloses the LED ribbon. Nevertheless, the NEON FLEX strips are highly flexible and can also be bent very well due to the small width of only 16mm. The silicone cover also grants a water resistance according to IP65.

Available variants

5m-Roll IP65 Water protection in silicone hose, incl. 10cm connection cable

The RGB-NEONFLEX are divisible every 5cm.

Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 150 Watt is required. 5m x 26W/m + 10% safety = 143 Watt.

For brightness control of the 5m, a driver with min. 4x1.5 Amps is required. 143W / 24V / 4 = 1.5 Amps.

You will find answers to frequently asked questions in our FAQ.

Properties "RGBW NEONFLEX LED Band - 26W/m - 16mm wide - VERTICAL bendable"

Brightness lm/m:	450
Power:	25
Seperatable every (cm):	5,0 cm
Strip width in mm:	16
Voltage:	24V
Water protection:	IP65 with silicon tube

Data according to manufacturer. Errors and changes reserved.

Manufacturer

LED-Studien GmbH

Mühlenweg 15

04451 Panitzsch

^{info@led-studien.de}

datasheet

Suitable accessories for Neonflex

10 x Neon Flex mounting clamp for 16x16mm

Content: 10 pieces aluminum retaining clip for Neonflex strips 16mm

Product number: LK04-38-KL

€4.90*

Silicone end cap for Neonflex 16x16mm

Suitable silicone glue can be ordered separately.

Product number: LK04-38-EK

€0.45*

5-pin RGBW connector (IP67) - with 2 x 1m cable

Set of plug and socket for RGBW LED strips or other connections with 5 connectors IP67 waterprotected with 2 x 1m cable Max. Connected load: 5 Ampere per contact Diameter: 16mm Lenght of complete connectors: 82mm Cable (1m pre-crimped) with 2 x 1mm² and 3 x 0.3mm²

Product number: LK27

€7.80*

RGBW flat ribbon cable 5x0,5mm²

This cable is a universal flat ribbon cable with 5 wires with 0.5mm² each in the colors black, white, green, blue, red. Scope of delivery: RGBW cable - length according to your quantity specification Please enter the desired quantity as item number. The delivery is usually made as one piece. If this is not possible for technical reasons, you will be informed in advance. Technical data: 5 cores a 0,5mm²

Product number: LK59r

€1.49*

Silicone (acetate-free!) - 5ml

With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).

Product number: SIL01

€2.50*

Silicone end cap for Neonflex 16x16mm - with cable outlet

Suitable silicone glue can be ordered separately.

Product number: LK04-38-EKL

€0.45*

Power supply

Power supply HLG 24V - 5.0A - 120 Watt, extremely quiet

Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data: Model HLG-120-24 Voltage 24V Maximum power 120W Current 5A Adjustable voltage range 22 ~ 27V Overcurrent protection 95...108% Inrush current, max. 65A Voltage input 90...264V AC (47...63Hz), 127...370V DC Power factor 0,95 Working temperature -40...+70°C Dimensions 2220x68x38.8mm (LxWxH) Weight 1,120g

Product number: LED1134

€59.00*

Recommended driver

LK55 Universal Controller 12-36V for LED Strips, Panels etc.

Product number: LK55mas

From €59.00*

Details

Control via app with the WLAN variant of the LK55 | 4 x 6A

The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose. Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss. If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel). Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8

Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones

Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All RGB(W) remote controls can operate all RGB(W) drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data: Item no. LK55FB3 Power supply 3 x 1,5V AAA batteries Dimensions (LxWxH) 120x55x17mm Operation:

Product number: LK55FB3

€49.00*

RGBW touch wall control | 1 zone | white

Select variant: 1 Zone | Color: white

Touch control for RGBW driver of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zone Wall remote control with touch field (4 memory keys) 4 Zone Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data: Item no. LK55w4bw Power supply 110-240VAC Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:

Product number: LK55w4bw

€52.50*