Skip to main content Skip to search Skip to main navigation
Customised assembly
High-quality technology
Engineering know-how

LED-Band digital WS2815 - 60 RGB-LEDs/m - IP20 - 12V

Pixel LED strips with 12V supply voltage are especially suitable for larger installations over several meters. While normal pixel LED strips with 5V require a new voltage supply every 2m at the latest due to the intensive voltage drop, with 12V strips 5m can also be realized without a new supply. 

In contrast to other 12V pixel solutions, with the WS2815 each LED is also a separately controllable pixel. So narrow resolutions with e.g. 30, 60, 72, 96 or even 144 pixels/m can be realized.

Another advantage of the WS2815 is that the data line is doubled. This leads to a significantly increased reliability. If one pixel fails, the following pixels remain unaffected. Furthermore, the WS2815 offers a comparatively high PWM frequency of 1,200Hz, which reduces flickering effects. 

WS2815 are compatible to the widely used WS2811 protocol (also WS2812) and therefore controllable with very many pixel controllers. For very large installations there are corresponding ArtNet Pixel drivers with up to 16 or even 32 DMX universes.

Delivery unit: one roll 5m


 

Technical data:

Item no. LK119-60
IC type WS2815 (SK6813 or similar)
Single colors 620-630nm red
510-525nm green
455-470nm blue
LEDs/m 60 - type 5050
Pixel/m 60
Width 10mm
divisible every 1.7cm
Voltage range 12V
Current/m 0.9A
Power consumption 10.8W/m
Luminous flux 260lm/m
PWM frequency 1,200Hz
Water protection IP20

 

Properties "LED-Band digital WS2815 - 60 RGB-LEDs/m - IP20 - 12V"
IP protection: IP20
Pixel/m: 60
Seperatable every (cm): 1,7 cm
Strip width in mm: 10
Voltage: 12V
LED/m: 60
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de