Customised assembly
High-quality technology
Engineering know-how

EnOcean CCT LED driver | 2x2x4A

€119.00*

Available, delivery time: 3-5 days

Product number: LK84
Available stock: 10

This EnOcean driver is designed for LED applications with adjustable color temperature. There are 4 outputs on the receiver to which 2 x warm white and 2 x cool white can be connected. Each output is loadable with 4A, so even very large installations are feasible.

The LED driver works e.g. with the EnOcean wall switches from our program. The advantage of all EnOcean switches is that they are completely maintenance-free without batteries and generate the minimum power requirements by micro-dynamo from the few switch movements.



Scope of delivery:

1x Receiver LK84



Notes:

All drivers of the EnOcean series remember the last setting even in case of power loss. 

If you want to control several light zones independently of each other, several drivers are always necessary. Drivers with several outputs (like here 4 x 4A) are not suitable to control several zones, because the outputs can only be controlled together (parallel).



Technical data:

Channels: 2 x 2 
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Connection: input (V+/ground) output (4xLED channel, V+)
IP class: IP 20
Dimensions: LxWxH 166x54x23mm

Recommended accessories

EnOcean wall-mounted remote control | 2 channel
Battery-free EnOcean remote control for use with the 2-channel LED controller LK84 from our program. Like all EnOcean remote controls, this wall switch is completely maintenance-free and draws the minimum power requirement from the switch movements themselves via micro-dynamo. The 2-channel remote control can be used (in combination with the EnOcean LED controller LK84) to control e.g. 2 white, warm white or monochrome LED zones, or alternatively a system with adjustable color temperature, such as these special stripes. Scope of delivery: 1x Remote control LK84FB1 Technical data: Dimensions: LxWxH 86x86x14mm
Product number: LK84FB1

€52.50*

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED amplifier works with an operating voltage of 12V to 36V DC. It offers 4 channels with 6 amps output power each.   Repeaters are used when the output power of the controller is not sufficient. For example, you want to use a controller with a certain control technology (DALI, KNX, radio or other), but your LED installation needs more amperage (amps) than the controller can provide. In this case, connect the controller to a repeater and run all LED strips through the repeater.  Note: We do not recommend running LED strips in parallel on controllers AND repeaters, as this may result in brightness and/or color deviations. The basic rule is: Either connect everything to controllers or everything to repeaters.  Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*