RGBW Pixel LED strips directly controllable via DMX | 24V
g
a
g
€175.00*
Content:
5 Meter
(€35.00* / 1 Meter)
Available, delivery time: 3-5 days
Product number:
LK11-6010b
Available stock:
52
These digital LED strips can be controlled directly via DMX. No separate DMX SPI converter or decoder is necessary, but a DMX signal can be fed directly into the strip.
Besides setting the start-address of the stripe, you can group pixels, as well as setting the behaviour on signal-loss (freeze the last frame or fixed values for R,G,B,W on the whole stripe).
The DirectDMX LED strips are also the ideal solution when it comes to large installations with a length of several meters. Since the power supply of the RGBW pixels runs on 24V, longer lengths are possible without any problems and without the need for a new power supply. The strips are also available with an IP67 waterproof silicone cover, making them suitable for outdoor use.
Addressing
The addressing is factory set so that the pixels are addressed starting at start address 1 (color sequence RGBW) and freezing on signal-loss. If you need a different addressing, just let us know. Optionally, you can also purchase a separate AddressWriter, which allows flexible addressing.
Scope of delivery:
- 5m DMX LED strip
- DMX input cable (5pin XLR)
Properties "RGBW Pixel LED strips directly controllable via DMX | 24V "
| IP protection: | IP20 |
|---|---|
| Pixel/m: | 10 |
| Power: | 17 |
| Seperatable every (cm): | 10 cm |
| Strip width in mm: | 12 |
| Voltage: | 24V |
| LED/m: | 60 |
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
Skip product gallery
Accessories for DirectDMX LED strips
AdressWriter for DMX LED stripes & chains
€220.00*
This AddressWriter allows the individual addressing of the DMX LED strips LK11-6010b, LK11-6010c and DMX LED chain LK47-2.The DMX start address as well as an offset (to skip addresses between the pixels) can be set. A grouping of the pixels is also possible. The AdressWriter also has several test programs to test the LED strip or chain. Powersupply via standard USB-C socket or 12-24 VDC screw terminals. Scope of delivery: AddressWriter SD-cardUSB-A to USB-C cable
Adressable ICs:UCS512A-H, USC512KH, UCS512KLSM1651, SM17512, SM17500, SM1852X, SM1952XTM512AB-E, TM512ALHi512A0, Hi512A4, Hi512A6, Hi512DGS8511-13 GS8515, GS8516, GS8523-26QEP512PKW512A
Product number:
LK11-WT03
AdressWriter for DMX LED stripes
€125.00*
This AddressWriter allows the individual addressing of the DMX LED strips LK11-6010b and LK11-6010c. The DMX start address of the strip as well as an offset (to skip addresses between the pixels) can be set. A grouping of the pixels is also possible. The AdressWriter also has several test programs to test the LED strip. Powersupply via standard USB-C socket or 12-48 VDC screw terminals. Scope of delivery: AddressWriter
Product number:
LK11-WT01
Skip product gallery
Accessories for IP67 LED strips
Silicone (acetate-free!) - 5ml
€2.50*
With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).
Product number:
SIL01