KNX wall-mounted remote control | 8 buttons

%

KNX LED driver 4-channel | 4x4A

This KNX driver is designed for 4-channel LED applications and can therefore be used, for example, to control RGBW LED systems or to dim 4 independent zones with white LEDs. Each of the 4 outputs can be loaded with 4A, which makes even very large installations feasible. The LED driver works with all known KNX drivers. Standalone operation Via the 4 buttons A, B, C, D the channels can also be switched (short press) and dimmed (long press) directly. This makes it possible, for example, to test the LED installation even before the driver is integrated in KNX. Scope of delivery: 1x Receiver LK85Download EPS application: https://www.led-studien.de/lk85-ets Technical data: Channels: 4Voltage: 12V-36V DCPower: Power connection via external switching power supply (not included)Load: 4A per output portConnection: input (V+/ground, KNX) output (4xLED channel, V+)IP class: IP 20Dimensions: LxWxH 166x54x23mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.

Product number: LK85

€69.00* €149.00* (53.69% saved)
previously €149.00*

KNX LED controller for DIN rail 4-channel | 4x4A

- integrated, automatic heating for drying - heater operation via unchoked output STV-640/STC series or external 24VDC supply - current consumption of the heater

Product number: M-300

€145.00*

Details

KNX LED controller for DIN rail 4-channel | 4x4A

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm color temperature control dynamic daylight control HCL (biologically effective light) automatic time-dependent dimming day/night function dimming via PWM (600/1,000 Hz settable)Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 4x, max. 4A each (power supplied by an external power supply, not inculded) - channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 4x white, 2xCCT, RGB, RGBW- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible); + shared with LED-stripe - connectors LED-stripe: 4x screw-terminal: A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements :4SU

Product number: M-102-H

€270.00*

KNX LED controller 3-channel | 3x3A

This controller can universally be used for white lighting installations with up to three zones, lighting installations with correlated color temperature (CCT) or RGB lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm color temperature control dynamic daylight control HCL (biologically effective light) automatic time-dependent dimming day/night function dimming via PWM (600/1,000 Hz settable)Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 3x, max. 3A each (power supplied by an external power supply, not inculded) - channels A and B can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 3x white, CCT, RGB- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors LED-stripe: 4x screw-terminal: +, A, B, C (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements : 46 mm x 25 mm x 113 mm

Product number: M-101-3

€225.00*

Details

KNX LED controller for DIN rail 4-channel | 4x2A

The wall switch can be flexibly configured to control e.g. blinds, heating, alarm modes or lighting (on/off, dimming, CCT, color). Each button can distinguish between short and long press (2 different KNX objects) and has a RGB status LED, so that the execution of control commands or the status of KNX elements can be tracked. It has a temperature sensor that can feedback the room temperature from 0 to 40°C via a KNX object. Furthermore, no external power supply is required - power is provides by the KNX bus. Download the ETS application.: technical data: - Can be used as 4/6/8/12-way pushbuttons - Innovative group control with long /extra long pushbutton action - Mapping function for easy function assignment - Extended info display with up to 3 lines and up to 6 measured values - Modern icons (loadable) - With temperature sensor (measuring range 0 - 40 °C) - Large, active color display for function and status indication - Background color of display adjustable (white or black) - Symbols and free texts for each key/function adjustable - 6 mechanical keys with finger recess - Up to 12 functions on 2 or 3 levels (2x6 or 3x4 functions) - Up to 6 functions without level switching - The keys are freely adjustable as key pair or single keys - One- and two-button operation for switching, dimming, blinds, values - Short/long pushbutton operation with 2 objects - RGB status of each sensor surface individually controllable per level - Display of indoor/outdoor temperature and time - Display brightness automatically via light sensor and day/night object - Mounting without frame in switch box - Specification KNX interface: TP-256 - available KXN databases: ETS4/5 - supply voltage: KNX bus (power consumption typ.

Product number: M-201T

€190.00*

Details

KNX LED controller 4-channel | 4x3A

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm color temperature control dynamic daylight control HCL (biologically effective light) automatic time-dependent dimming day/night function dimming via PWM (600/1,000 Hz settable)Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 4x, max. 3A each (power supplied by an external power supply, not inculded) - channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 4x white, 2xCCT, RGB, RGBW- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors LED-stripe: 5x screw-terminal: +, A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements : 46 mm x 25 mm x 113 mm

Product number: M-101-4

€245.00*

KNX LED controller for DIN rail 4-channel | 4x4A

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm CCT-function dynamic daylight-control HCL (human centric lighting) automatic time-dependant dimming day/night functionMoreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 4x, max. 4A each (power supplied by an external power supply, not inculded) - channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 4x white, 2xCCT, RGB, RGBW- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible); + shared with LED-stripe - connectors LED-stripe: 4x screw-terminal: A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements :4SU

Product number: M-103-HAC

€290.00*

Details

KNX LED controller for DIN rail 4-channel | 4x2A

The wall switch can be flexibly configured to control e.g. blinds, heating, alarm modes or lighting (on/off, dimming, CCT, color). Each button can distinguish between short and long press (2 different KNX objects) and has a RGB status LED, so that the execution of control commands or the status of KNX elements can be tracked. It has a temperature sensor that can feedback the room temperature from 0 to 40°C via a KNX object. Furthermore, no external power supply is required - power is provides by the KNX bus. Download the ETS application.: technical data: - high quality glass housing - Can be used as 4/6/8/12-way pushbuttons - Innovative group control with long /extra long pushbutton action - Mapping function for easy function assignment - Extended info display with up to 3 lines and up to 6 measured values - Modern icons (loadable) - With temperature sensor (measuring range 0 - 40 °C) - General functions: Large, active color display for function and status indication - Background color of display adjustable (white or black) - Symbols and free texts for each key/function adjustable - 6 mechanical keys - Up to 12 functions on 2 or 3 levels (2x6 or 3x4 functions) - Up to 6 functions without level switching - The keys are freely adjustable as key pair or single keys - One- and two-button operation for switching, dimming, blinds, values - Short/long pushbutton operation with 2 objects - RGB status of each sensor surface individually controllable per level - Display of indoor/outdoor temperature and time - Display brightness automatically via light sensor and day/night object - Mounting without frame in switch box - Specification KNX interface: TP-256 - available KXN databases: ETS4/5 - supply voltage: KNX bus (power consumption typ.

Product number: M-202T

€199.00*

KNX bus PSU 320 mA

- KNX bus power supply with integrated choke - Supply voltage 230 V AC - Short circuit proof, overload proof - Temperature monitoring with shutdown in case of overtemperature - LEDs for bus reset, normal operation and overload - max. cable cross-section: screw terminals: 0.5-4.0mm² solid, 0.5-2.5mm² flexible; KNX bus terminal: Ø0.8mm solid wire - Ambient temperature: 0 - 45 °C - Dimensions: 2DU

Product number: M-901-H

€145.00*

KNX bus terminal, black/red

solid core 0,8 mm

Product number: M-900

€0.95*

KNX Presence detector 360° with constant light control

Presence detector 360° with constant light control with 4 Pyro detectors, pure white matt - design for ceiling mounting in the switch box - extensive application - 4 sensors with lens for presence detection - adjustable stand-by and presence sensitivity for day, night and alarm - 4 light channels, sensors can be evaluated individually - 1 HVAC and 1 alarm/signaling channel - short-time presence to reduce the overrun time - intelligent switching function for automatic and manual operation - blocking and forcing function with release time - extensive day/night function with 2nd switching object - integrated white LED night light - orientation light function for leaving the room - avoidance of false alarms for alarm channel due to reduced sensitivity and adjustable observation window - range Ø: 16 m, presence Ø: 8 m

Product number: M-301

€145.00*

KNX LED controller for DIN rail 4-channel | 4x2A

The wall switch can be flexibly configured to control e.g. blinds, heating, alarm modes or lighting (on/off, dimming, CCT, color). Each button can distinguish between short and long press (2 different KNX objects) and has a RGB status LED, so that the execution of control commands or the status of KNX elements can be tracked. It has a temperature sensor that can feedback the room temperature from 0 to 40°C via a KNX object. Furthermore, no external power supply is required - power is provided by the KNX bus. Download the ETS application.: technical data: - model: 2 pairs of buttons, 4 sensor surfaces - suitable for 55mm switch programs e.g.: GIRA Standard 55, E2, E22, Event, Esprit, BERKER S1, B3, B7, JUNG A500, Aplus, Acreation, AS500, MERTEN 1M, M-Smart, M-Plan, M-Pure - extensive application - the buttons are freely adjustable as button pair or single buttons - one- and two-button operation for switching, dimming, shutter, values - switch values/scenes with up to 4 values - short/long keystroke with 2 objects - four RGBW status LEDs. LED brightness adjustable via day/night object - temperature sensor for room temperature measurement (measuring range 0 - 40 °C) - 4 logic blocks - Design: neutral - Installation in switch box - specification KNX interface: TP-256 - available KXN databases: ETS4/5 - supply voltage: KNX bus (power consumption typ. <0,5W) - max. cable cross section KNX bus terminal: Ø0,8mm solid conductor - IP protection class: IP20

Product number: M-200T

€78.00*

KNX LED controller for DIN rail 4-channel | 4x2A

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm color temperature control dynamic daylight control HCL (biologically effective light) automatic time-dependent dimming day/night function dimming via PWM (600/1,000 Hz settable)Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 4x, max. 2A each (power supplied by an external power supply, not inculded) - channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 4x white, 2xCCT, RGB, RGBW- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible); + shared with LED-stripe - connectors LED-stripe: 4x screw-terminal: A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible)- IP-class: 20 - operating temperature: 0 - 45 °C - measurements : 2SU

Product number: M-100-H

€185.00*

KNX LED controller 2-channel | 2x3A

This controller can be used universally either for white lighting installations with one or two zones or for lighting installations with correlated color temperature (CCT). It supports absolute and relative dimming with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm color temperature control dynamic daylight control HCL (biologically effective light) automatic time-dependent dimming day/night function dimming via PWM (600/1,000 Hz settable)Moreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application:.knxprod (product database ETS4/5/6), .etsapp (Device Configuration App (DCA) ETS5/6)technical data: - channels: 2x, max. 3A each (power supplied by an external power supply, not inculded) - both channels can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 2x white, CCT - specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors LED-stripe: 3x screw-terminal: +, A, B (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements : 46 mm x 25 mm x 113 mm

Product number: M-101-2

€170.00*

KNX IP interface

This controller can universally be used for white lighting installations with up to four zones, lighting installations with correlated color temperature (CCT) with up to zwo zones as well as RGB or RGBW lighting istallations. It supports absolute and relative dimming in the HSV and RGB color spaces with a configurable gamma curve. Furthermore, the following convenient functions are supported: automatic dim2warm CCT-function dynamic daylight-control HCL (human centric lighting) automatic time-dependant dimming day/night functionMoreover, the controller is equipped with internal overcurrent and temperature protection as well as an intelligent 16A/230V AC-load relais for switching the external LED power supply. Download the ETS application.: technical data: - channels: 4x, max. 2A each (power supplied by an external power supply, not inculded) - channels A/B and C/D can be operated in parallel (Bridging the channels directly on the output screw-terminals is strictly required!) - dimming via PWM (600/1.000Hz, adjustable) - operating modes: 4x white, 2xCCT, RGB, RGBW- specification of the KNX-interface: TP-256 - available KXN-databases: ETS4/5/6- voltage: 12V-24V DC - power supply via KNX-bus (solid wire Ø0,8mm, power consumption typ. <0,3W) - connectors DC-input: 2x screw-terminal: +, - (0,5-4,0mm² solid, 0,5-2,5mm² flexible); + shared with LED-stripe - connectors LED-stripe: 4x screw-terminal: A, B, C, D (0,5-4,0mm² solid, 0,5-2,5mm² flexible) - connectors 230V-relais: 2x screw-terminal : L(IN), L(OUT) (0,5-4,0mm² solid , 0,5-2,5mm² flexible) - IP-class: 20 - operating temperature: 0 - 45 °C - measurements : 2SU

Product number: M-902-H

€199.00*

Details