RGBW Pixel LED strips directly controllable via DMX | 24V
g
a
g
LK14-6010b
€125.00*
Content:
5 Meter
(€25.00* / 1 Meter)
Available, delivery time: 3-5 days
Product number:
LK14-6010b
Available stock:
42
These digital LED strips can be controlled directly via DMX. No separate DMX SPI converter or decoder is necessary, but a DMX signal can be fed directly into the strip.
The DirectDMX LED strips are also the ideal solution when it comes to large installations with a length of several meters. Since the power supply of the RGBW pixels runs on 24V, longer lengths are possible without any problems and without the need for a new power supply.
Addressing
The addressing is factory set so that the pixels are addressed starting at start address 1 (color sequence RGBW). If you need a different addressing, just let us know. Optionally, you can also purchase a separate AddressWriter, which allows flexible addressing.
Scope of delivery:
- 5m DMX LED strip
Properties "RGBW Pixel LED strips directly controllable via DMX | 24V "
| IP protection: | IP20 |
|---|---|
| Pixel/m: | 10 |
| Power: | 17 |
| Seperatable every (cm): | 10 cm |
| Strip width in mm: | 12 |
| Voltage: | 24V |
| LED/m: | 60 |
Data according to manufacturer. Errors and changes reserved.
Manufacturer
LED-Studien GmbH
Mühlenweg 15
04451 Panitzsch
info@led-studien.de
Accessories for DirectDMX LED strips
AdressWriter for DMX LED stripes
€125.00*
This AddressWriter allows the individual addressing of the DMX LED strips LK11-6010b and LK11-6010c. The DMX start address of the strip as well as an offset (to skip addresses between the pixels) can be set. A grouping of the pixels is also possible. The AdressWriter also has several test programs to test the LED strip. Powersupply via standard USB-C socket or 12-48 VDC screw terminals. Scope of delivery: AddressWriter
Product number:
LK11-WT01
AdressWriter for DMX LED stripes & chains
€220.00*
This AddressWriter allows the individual addressing of the DMX LED strips LK11-6010b, LK11-6010c and DMX LED chain LK47-2.The DMX start address as well as an offset (to skip addresses between the pixels) can be set. A grouping of the pixels is also possible. The AdressWriter also has several test programs to test the LED strip or chain. Powersupply via standard USB-C socket or 12-24 VDC screw terminals. Scope of delivery: AddressWriter SD-cardUSB-A to USB-C cable
Adressable ICs:UCS512A-H, USC512KH, UCS512KLSM1651, SM17512, SM17500, SM1852X, SM1952XTM512AB-E, TM512ALHi512A0, Hi512A4, Hi512A6, Hi512DGS8511-13 GS8515, GS8516, GS8523-26QEP512PKW512A
Product number:
LK11-WT03
Suitable power supply
Power supply HLG 24V - 5.0A - 120 Watt, extremely quiet
€59.00*
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W
Overload protection by current limitation, auto recovery
protected against short circuit, overload, overvoltage
built-in PFC circuit
for indoor and outdoor use (IP65)
adjustable output voltage
adjustable current limitation
Technical data:
Model
HLG-120-24
Voltage
24V
Maximum power
120W
Current
5A
Adjustable voltage range
22 ~ 27V
Overcurrent protection
95...108%
Inrush current, max.
65A
Voltage input
90...264V AC (47...63Hz), 127...370V DC
Power factor
0,95
Working temperature
-40...+70°C
Dimensions
2220x68x38.8mm (LxWxH)
Weight
1,120g
Product number:
LED1134