RGBWW 4in1 in silicone tube: 72 LEDs/m - IP67 10m roll

€165.00*

Content: 10 (€16.50* / 1 Meter)

Available, delivery time 3-5 days

Length/VPE
Product number: LK04-6f-10
Available stock: 17

  • LED Type: 5050 - RGBW (4in1)
  • Water protected in silicone hose with IP67
  • 72 LED/m 
  • Brightness: 1,500lm/m total (600lm/m for white)
  • Voltage: 24V
  • Power: 23 Watt/m
  • Width: 14mm

Price for 1 roll = 10 meters



The latest form of RGBWW LED strips consists of 4 in 1 LEDs. Here, all 4 colors are integrated into one LED housing. This means you no longer have alternating white and RGB LEDs on the flex strip and a harmonious light distribution even at short distances. An ideal solution e.g. for effect lighting applications in confined areas!

This variant is water-protected in the silicone tube with IP67 and therefore the right choice for all outdoor applications or e.g. also in the bathroom.

New with these LED strips is also the LED count of 72 LEDs/m. This promises an even higher luminosity for color effects. The warm white chips (2700-2900K) reach approx. 600lm/m.


ATTENTION:

The 10m variant of the LK04-6f has connecting cables on both sides (i.e. at the beginning and end of the 10m) and both connecting cables should be connected in parallel to the controller. If only 1 connection cable is used, there will be a significant voltage and thus brightness drop over the 10m length of the tape!


Available variants

All variants have a 3M adhesive tape on the back for mounting and are divisible every 8.33cm (all 6LEDs).
 


Notes on accessories:

To operate 5m (1 roll) of LED strips, a 12 or 24V power supply with min. 130 Watt is required. 5m x 23W/m + 10% safety = 127 Watt.

https://shop.led-studien.de/de/zubehor/netzteile

For a color control of the 5m in 12V version, an RGBW controller (4-channel) with min. 4 x 2.6 Amp is required. 123W / 12V / 4 = 2.6 amps.

For a color control of the 5m in 24V version a RGBW controller (4-channel) with min. 4 x 1.3 Amp is needed. 79W / 24V / 4 = 1.3 Amps.

https://shop.led-studien.de/de/controller/standard-rgbw

You will find answers to frequently asked questions in our FAQ.


 

Properties "RGBWW 4in1 in silicone tube: 72 LEDs/m - IP67 10m roll"
Brightness lm/m: 1500
Energy efficiency class (EEK): G
Length/VPE: 10m
Power: 25
Seperatable every (cm): 8,3 cm
Strip width in mm: 14
Voltage: 24V
Water protection: IP67 with silicon tube
LED/m: 72
Data according to manufacturer. Errors and changes reserved.
datasheet

Power supply

Power supply HLG 24V - 7.8A - 185 Watt, extremely quiet
Switching power supply Meanwell HLG-185-24, 24 Volt, 7.8 Ampere, 185W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data:  Model HLG-185-24  Voltage 24V  Maximum power 185W  Current 7.8A  Adjustable voltage range 22 ~ 27V  Overcurrent protection 95...108%  Inrush current, max. 65A  Voltage input 90...264V AC (47...63Hz), 127...370V DC  Power factor 0,95  Working temperature -40...+70°C  Dimensions 2228x68x38.8mm (LxWxH)  Weight 1,150g  
Product number: LED1125

€66.00*

Recommended driver

Control via app with the WLAN variant of the LK55 | 4 x 6A
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.  Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss.  If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).   Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8
Product number: LK35-8

€79.00*

Suitable remote control for driver

Remote control, with touch wheel & buttons | 4 zones
Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data:  Item no. LK55FB3  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:  
Product number: LK55FB3

€49.00*
Wall controls for RGBW color control (LK55)
Touch control for RGBW controller of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zonen Wall remote control with touch field (4 memory keys) 4 Zonen Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data:  Item no. Lk55w4bw  Power supply 110-240VAC  Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:
Product number: LK55w4mas

€52.50*

Suitable accessories for IP67

Silicone: approx. 5ml
With this silicone you can seal neonflex- or normal LED-stripes in a silicone tube (IP67/68) with the corresponding end-caps watertight. This is especially usefull if a roll has to be devided into several parts. The silicone is acetate-free, thus no acetic acid is produced while curing, which would damage the electrical components.A tube with 5ml is enough to seal approx. 2-5 end-caps (depending on the size of the end-caps).
Product number: SIL01

€2.50*
Silicone end cap: 14mm
Suitable silicone can be ordered separately.
Product number: SAK14

€0.30*