Go to homepage
Wishlist
Shopping cart €0.00*

RGB Neon Flex LED Band - 20W/m - 11mm wide - VERTICAL bendable

.
LED-Streifen lk04-3h
LED-Streifen neonflex-rgb-rot
LED-Streifen neonflex-rgb-gruen
LED-Streifen neonflex-rgb-blau
LED-Streifen neonflex-rgb-weiss
LED-Streifen neonflex-rgb-band
LED-Streifen neonflex-rgb-anschluss
LED-Streifen neonflex-rgb-installationsmaterial
RGB Neon Flex LED Band - 20W/m - 11mm wide - VERTICAL bendable
LED-Streifen lk04-3h
LED-Streifen neonflex-rgb-rot
LED-Streifen neonflex-rgb-gruen
LED-Streifen neonflex-rgb-blau
LED-Streifen neonflex-rgb-weiss
LED-Streifen neonflex-rgb-band
LED-Streifen neonflex-rgb-anschluss
LED-Streifen neonflex-rgb-installationsmaterial
RGB Neon Flex LED Band - 20W/m - 11mm wide - VERTICAL bendable
g
a g
product-datasheet

€99.00*

Content: 5 (€19.80* / 1 Meter)

Prices incl. VAT plus shipping costs

Available, delivery time 3-5 days

Product number: LK04-3h
Available stock: 37
  • LED type: 5050
  • 96 LED/m
  • Waterproof IP67
  • Brightness: total 750 lm/m
    Red: 140 lm/m
    Green 500 lm/m
    Blue: 110 lm/m
  • Voltage: 24 Volt
  • Power: 20 Watt/m
  • Width: 11mm
  • Height: 11mm

Price for 1 roll = 5m


The RGB NEON FLEX ribbons are absolutely uniform light ribbons with almost no individual LEDs visible. This is achieved by a milky-opal silicone shell that encloses the LED ribbon. Nevertheless, the NEON FLEX strips are highly flexible and can also be bent very well due to the small width of only 11mm. The silicone cover also grants a water resistance according to IP67.

Available variants

  • 5m-Roll IP67 Water protection in silicone hose, incl. 10cm connection cable
All variants have a 3M adhesive tape on the back for mounting and are divisible every 6.2cm.


Notes on accessories:

To operate 5m (1 roll) of LED strips, a 24V power supply with min. 110 Watt is required. 5m x 20W/m + 10% safety = 110 Watt.

For brightness control of the 5m, a driver with min. 3 x1.5 Amps is required. 110W / 24V / 3 = 1,5 Amps.

You will find answers to frequently asked questions in our FAQ.

 

Properties "RGB Neon Flex LED Band - 20W/m - 11mm wide - VERTICAL bendable"
Brightness lm/m: 700
Power: 20
Seperatable every (cm): 6,2 cm
Strip width in mm: 11
Voltage: 24V
Water protection: IP67 with silicon tube
LED/m: 96
Data according to manufacturer. Errors and changes reserved.
datasheet

Suitable accessories for Neonflex

Waterprotected cable set: 4-pin
Waterprotected cable set: 4-pin
Das Set erlaubt es in Verbindung mit Silikondichtmasse und Endkappen wasserdichte Anschlüsse für RGB-LED-Streifen herzustellen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Stücke geteilt werden soll.
Product number: LK04-23d-Con4

€2.80*
Silicone end cap for Neonflex RGB
Silicone end cap for Neonflex RGB
Suitable silicone can be ordered separately.
Product number: LK04-3h-ek

€0.90*
Silicone: 10ml
Silicone: 10ml
Mit der Silikondichtmasse lassen sich Neonflex- oder LED-Streifen im Silikonschlauch (IP67/68) mit entsprechenden Endkappen wieder wasserdicht verschließen. Dies ist vor allem nützlich, wenn eine Rolle in mehrere Teilstücke aufgeteilt werden soll. Das Silikon ist acetatfrei wodurch beim Aushärten keine Essigsäure entsteht, welche die elektronischen Bauteile des LED-Bandes beschädigt. Eine Tube á 10ml reicht zum Versiegeln von ca. 4-6 Endkappen (je nach Größe der Endkappe).
Product number: SIL01

€2.50*
Details

Power supply

Netzteil LED1134
Power supply HLG 24V - 5A - 120 Watt, extremely quiet
Switching power supply Meanwell HLG-120-24, 24 Volt, 5 Ampere, 120W Overload protection by current limitation, auto recovery protected against short circuit, overload, overvoltage built-in PFC circuit for indoor and outdoor use (IP65) adjustable output voltage adjustable current limitation Technical data:  Model HLG-120-24  Voltage 24V  Maximum power 120W  Current 5A  Adjustable voltage range 22 ~ 27V  Overcurrent protection 95...108%  Inrush current, max. 65A  Voltage input 90...264V AC (47...63Hz), 127...370V DC  Power factor 0,95  Working temperature -40...+70°C  Dimensions 2220x68x38.8mm (LxWxH)  Weight 1,120g  
Product number: LED1134

€49.00*

Recommended driver

LK55 Universal Controller 12-36V for LED Strips, Panels etc.
LK55 Universal Controller 12-36V for LED Strips, Panels etc.
Product number: LK55mas

From €59.00*
Details
Controller lk35-8_wlanledcontroller
Control via app with the WLAN variant of the LK55 | 4 x 6A
The combined radio/WiFi driver is a classic LK55 with built-in WLAN receiver and sets standards in this field. It can be operated with a radio remote control (LK55 series) or also via smartphone with iOS or Android. Corresponding apps are available: EasyLighting App for Android / für IOS RealColor App for Android / für IOS In the standard version, the receiver has its own integrated access point for WLAN control. However, the receiver can also be set as a WLAN client via an integrated configuration page. This connects the receiver to an existing WLAN at home and provides its services without changing the network. If several cell phones or tablets are used, a simple share function can be used to transfer the learned drivers from one app to another. This means that it is not necessary to retrain the drivers, even if the cell phone is changed, for example. The driver can additionally be operated with remote controls. The hand- and wall controls of the LK55 series are suitable for this purpose.  Notes: All drivers of our LK35/55 series remember the last setting even in case of power loss.  If you want to operate several light zones independently of each other, several drivers are always necessary. drivers with several outputs (like here 4 x 6A) are not suitable to operate several zones, because the outputs can only be controlled together (parallel).   Technical data: Channels: 3/4 (e.g. RGBW) switchableVoltage: 12V-36V DCPower: up to 24A power supply via external switching power supply (not included), max. 6A per channelConnection: input: V+/ground; output: Ch.1-4 (R,G,B,W) ,V+IP class: IP 20 Dimensions (L*W*H): 171x58x28mm Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. Instruction video for the installation of the LK35-8
Product number: LK35-8

€79.00*

Suitable remote control for driver

Fernbedienung lk55fb3_mitwandhalterung
Remote control, with touch wheel & buttons | 4 zones
Control of color & brightness, up to 4 light zones controllable Touch wheel for color selection Separate dim button for white LEDs 3 memory buttons for individual colors All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Technical data:  Item no. LK55FB3  Power supply 3 x 1,5V AAA batteries  Dimensions (LxWxH) 120x55x17mm   Operation:  
Product number: LK55FB3

€49.00*
Wandsteuerung LK55w4mas
Wall controls for RGBW color control (LK55)
Touch control for RGBW controller of the LK55 series Controllable zones: 1 4 memory buttons for individual color scenes Power supply: 110-240VAC Color: white Our RGBW wall remotes differ in some details: 1 Zonen Wall remote control with touch field (4 memory keys) 4 Zonen Wall-mounted remote control with touch field (4 memory locations, 4 zones can be controlled separately) All remote controls can operate all drivers / receivers of the LK55 series and, if required, also the WiFi driver LK35. It is also possible for several remote controls to operate one driver. E.g. a handheld remote control and an additional wireless wall panel or several wireless wall panels at different positions in the room. If required, up to 8 remote controls can operate 1 driver. The range of the radio signal is up to 25m. Visual contact is not necessary. Solid walls made of concrete, brick or similar naturally weaken the radio signal. Combination with switch series of well-known manufacturers The housing frame of the controls measures 86x86mm with a depth of 12mm. In case you want to combine the wall control with light switches, sockets etc., the following switch series are similar in design and dimensions: MERTEN M-Plan GIRA E2 (flat installation) JUNG Serie A Creation KOPP HK i8 ROHDE+ROHDE Check the exact dimensions directly with the manufacturers. Technical data:  Item no. Lk55w4bw  Power supply 110-240VAC  Dimensions (WxHxD) 86x86x12mm, Installation depth: 20mm Operation:
Product number: LK55w4mas

€52.50*
Details
This website uses cookies to ensure the best experience possible. More information...