KNX LED driver 4-channel | 4x4A

€149.00*

Available, delivery time 3-5 days

Product number: LK85
Available stock: 33

This KNX driver is designed for 4-channel LED applications and can therefore be used, for example, to control RGBW LED systems or to dim 4 independent zones with white LEDs.  Each of the 4 outputs can be loaded with 4A, which makes even very large installations feasible.

The LED driver works with all known KNX drivers.



Standalone operation

Via the 4 buttons A, B, C, D the channels can also be switched (short press) and dimmed (long press) directly. This makes it possible, for example, to test the LED installation even before the driver is integrated in KNX.



Scope of delivery:

1x Receiver LK85



Technical data:

Channels: 4
Voltage: 12V-36V DC
Power: Power connection via external switching power supply (not included)
Load: 4A per output port
Connection: input (V+/ground, KNX) output (4xLED channel, V+)
IP class: IP 20
Dimensions: LxWxH 166x54x23mm

Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here. 

Recommended accessories

KNX wall-mounted remote control | 8 buttons
Remote control in for wall mounting with 8 buttons. Scope of delivery: 1x KNX wall remote control LK85-K8 Technical data: Dimensions: LxWxH 86x86mm  
Product number: LK85-K8

€169.00*

Repeater

LED Repeater / Amplifier | 4 x 6A
This LED repeater works with an operating voltage of 12V to 24V DC. The repeater fits e.g. ideally to the RGBW-drivers series with 4 channels. But it can also be used in combination with many other drivers and with pure white LED lights. Up to 6 amperes of current are available per channel, so that the full luminosity can still be used when using large LED installations. Technical data: Dimensions: 170*58*29mmVoltage: 12-24V DCPower: 4 x 6AIP class: IP20 Note: The driver has double voltage inputs (++--). For high connected load (> 200 Watt), use our special connection cables for high connected loads (> 200 watts) in order to divide the current load between the two inputs. The large power supplies HLG-480 and HLG-600 already have double voltage outputs, so that both voltage inputs of the driver can be used directly here.
Product number: LK51

€35.00*